Makita PC5010C 125mm Concrete Grinding Planer

The Makita PC5010C Concrete Grinding Planer (478084) is a professional-grade 125mm (5") corded tool built for concrete surface preparation and grinding. It runs on a 1,400W motor and is available in both 240V and 110V configurations to suit site requirements. Compact and lightweight, it's designed for tradespeople who need precision and control on the job.

Variable speed runs from 4,000 to 9,000rpm via a dial, letting you match speed to the task. Constant speed control maintains consistent performance under load. Soft start gives you controlled, safe operation from the moment you switch on. Anti-restart protection prevents accidental start-up after a power interruption a key safety feature on site.

The Super Joint System II absorbs vibration during grinding which reduces operator fatigue and extends machine life. The ergonomic handle is designed for prolonged use. The removable front cover lets you plane flush to walls and corners for full surface coverage. An electronic current limiter provides overload protection.

Double insulation adds an extra layer of electrical safety. For concrete surface prep this is a hard-working tool with genuine safety credentials and practical design features that make a real difference on site.

The PC5010C uses a 1,400W corded motor with variable speed control from 4,000 to 9,000rpm adjusted via a dial. Constant speed control keeps performance steady under load. The Super Joint System II is a built-in vibration dampening system that sits between the motor and the body it reduces the vibration transferred to the operator's hands during grinding. Soft start limits the initial torque surge. The electronic current limiter cuts in if the motor is overloaded. Anti-restart stops the tool powering back on after a supply interruption. Double insulation provides electrical safety without needing an earth connection.

Always fit the correct guard before use a grinding guard for surface work. Check every disc is rated to at least 9,000rpm before fitting. Use the ergonomic handle with both hands for control. Wear eye protection, a dust mask, hearing protection and gloves. The PC5010C's soft start reduces sudden torque on start-up. Anti-restart protection means the tool won't start unexpectedly after a power cut. Always wait for the disc to stop fully before setting the tool down.