Makita GA5095X01 Paddle Switch Angle Grinder 125mm

The Makita GA5095X01 (659928) is a corded 125mm paddle switch angle grinder available in 110v and 240v variants. It's built for metal fabrication, construction, automotive repairs and DIY work. The 2.5m power cord gives you real reach on site without an extension lead.

The motor delivers high-speed grinding and cutting with electronic constant speed control that holds performance steady under load. No battery needed this is a corded tool. Speed stays consistent whether you're cutting steel or grinding welds.

Soft start reduces the initial jerk when you pull the trigger. The anti-restart function stops the grinder firing up unexpectedly after a power interruption. Labyrinth construction seals the motor and bearings from dust and debris a big deal for longevity on dirty sites. The slim barrel grip and ergonomic body reduce fatigue during extended use. Active Feedback Sensing Technology monitors performance in real time.

The paddle switch with lock-off adds another layer of safety. Double insulation and a current limiter are both fitted as standard. Improved cooling keeps heat out of the housing during long sessions. If you need a dependable 125mm grinder with serious safety features built in this is a strong choice.

The GA5095X01 is a corded 125mm angle grinder built around electronic constant speed control this keeps the disc spinning at a steady rate even when load increases. Active Feedback Sensing Technology monitors motor output in real time and adjusts accordingly. Soft start limits the initial torque surge when you pull the trigger. The anti-restart function cuts power if the supply is interrupted and then restored. Labyrinth construction physically seals the motor and bearings from dust ingress. Double insulation and a current limiter add further electrical protection. Available in 110v for site use or 240v for workshop and home use.

Always fit the correct guard use a grinding guard for grinding discs and a cutting guard for cutting discs. Check every disc is rated at or above this tool's no-load speed before fitting. Use the side handle at all times for proper two-handed control. Wear eye protection, gloves and hearing protection. The anti-restart function protects you after power cuts but always wait for the disc to stop fully before setting the tool down.