23 products from trusted UK retailers
Paddle switch angle grinders put the power switch under your palm. That means the tool cuts out the moment you let go - a genuine safety advantage over trigger or slide switches when you're cutting steel or grinding welds.
The paddle design is the main reason tradespeople choose these over standard models. There's no fumbling for a switch mid-cut. Drop the tool and it stops. That matters on a busy site.
Most models run at 11,000 RPM or higher. Disc size is usually 115mm or 125mm for handheld work though 230mm versions exist for heavy-duty cutting tasks. Match the disc size to the guard supplied - never run a disc rated below the tool's RPM.
For prolonged use look at the amperage. A 1,200W motor handles light fabrication work but for consistent heavy grinding you want 1,500W or above. Brushless motors last longer and run cooler under load.
Disc compatibility matters too. Check that the spindle thread matches your existing discs before buying. Most UK models use an M14 thread as standard.
