Makita GA5091X01 125mm Variable Speed Angle Grinder

The Makita GA5091X01 (659931) is a corded 125mm angle grinder available in 110V and 240V. It's built for both professional tradespeople and serious DIY users who need reliable performance across grinding and cutting tasks. This is not a lightweight hobby tool it's engineered to handle tough, repeated use.

The motor runs at a variable speed range of 2,800 - 11,500rpm controlled by a dial. Electronic speed control maintains consistent performance under load so the disc doesn't bog down mid-cut. A 2.5m power cord gives you real working reach on site.

Active Feedback Sensing Technology adds a serious layer of safety alongside an anti-restart function and mechanical brake. Soft start reduces the initial jolt when you pull the trigger. The slide switch has a lock-off to prevent accidental starts. The adjustable side handle and tool-less wheel guard make setup fast and handling secure.

Variable speed and constant speed control make this grinder capable across metal cutting, masonry work and weld smoothing. Double insulation and a current limiter protect both user and motor. Tool-less wheel cover adjustment means faster disc changes on the job. Backed by Makita's manufacturer warranty covering all manufacturing defects for the normal lifetime of the tool.

The GA5091X01 is a corded 125mm angle grinder with a variable speed dial running from 2,800 to 11,500rpm. This range lets you run slower for masonry or faster for metal cutting. Electronic speed control keeps the disc speed steady under load so performance doesn't drop mid-task. Active Feedback Sensing Technology monitors the tool during use and reacts to protect both user and motor. A mechanical brake stops the disc fast after switch release. Soft start eases the disc up to speed gradually. Double insulation and a current limiter protect the motor from electrical faults and overload.

Always fit the correct guard use a grinding guard for grinding and a cutting guard for cutting. Check every disc is rated at or above 11,500rpm before fitting. Use the adjustable side handle at all times for proper control. Wear eye protection, gloves and hearing protection. The mechanical brake stops the disc quickly after release but wait until it has fully stopped before setting the tool down. The anti-restart function means the grinder will not restart after a power interruption.